init

.cproject

@@ -0,0 +1,208 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
+					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256." name="/" resourcePath="">
+						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.579284986" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.394694178" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F302R8Tx" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1613040724" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.964678937" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.165937517" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.421926225" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.2042088444" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="NUCLEO-F302R8" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.919847735" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || NUCLEO-F302R8 || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../Drivers/STM32F3xx_HAL_Driver/Inc | ../Drivers/STM32F3xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32F3xx/Include | ../Drivers/CMSIS/Include ||  ||  || USE_HAL_DRIVER | STM32F302x8 ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F302R8TX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None ||  ||  || " valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.288328361" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="64" valueType="string"/>
+							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.467422488" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
+							<builder buildPath="${workspace_loc:/nucleo-stm32f302r8}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.744774263" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.234320939" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.718645353" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.92722004" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="DEBUG"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.107541740" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.13615456" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.1106165515" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.1856856434" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1569789449" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="DEBUG"/>
+									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
+									<listOptionValue builtIn="false" value="STM32F302x8"/>
+								</option>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.588175197" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
+									<listOptionValue builtIn="false" value="../Core/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc/Legacy"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F3xx/Include"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.179906366" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.781944678" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1293194278" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.108867795" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.definedsymbols.1699323545" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="DEBUG"/>
+									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
+									<listOptionValue builtIn="false" value="STM32F302x8"/>
+								</option>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.includepaths.1191982886" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
+									<listOptionValue builtIn="false" value="../Core/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc/Legacy"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F3xx/Include"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.input.cpp.1993709501" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.input.cpp"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1015616578" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.44584340" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script.2139800311" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F302R8TX_FLASH.ld}" valueType="string"/>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.input.1856475826" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.input">
+									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+								</inputType>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1633811556" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.213410000" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.434578337" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1159005782" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.2008296177" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.333117850" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1210238986" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1400206432" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
+						</toolChain>
+					</folderInfo>
+					<sourceEntries>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
+					</sourceEntries>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364" moduleId="org.eclipse.cdt.core.settings" name="Release">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
+					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364." name="/" resourcePath="">
+						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.1912765516" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1232679945" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F302R8Tx" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1426382083" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.1345153833" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1229593627" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1072219857" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.911085070" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="NUCLEO-F302R8" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1967154735" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || NUCLEO-F302R8 || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../Drivers/STM32F3xx_HAL_Driver/Inc | ../Drivers/STM32F3xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32F3xx/Include | ../Drivers/CMSIS/Include ||  ||  || USE_HAL_DRIVER | STM32F302x8 ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F302R8TX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None ||  ||  || " valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1032374833" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="64" valueType="string"/>
+							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.2072289574" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
+							<builder buildPath="${workspace_loc:/nucleo-stm32f302r8}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1629279545" managedBuildOn="true" name="Gnu Make Builder.Release" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.806866595" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1269274866" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.875342414" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1815780605" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.1915866466" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.1867025166" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.472030164" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
+									<listOptionValue builtIn="false" value="STM32F302x8"/>
+								</option>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.932502346" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
+									<listOptionValue builtIn="false" value="../Core/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc/Legacy"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F3xx/Include"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1645274246" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.642164503" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.437088988" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1067415295" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.definedsymbols.2131072306" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
+									<listOptionValue builtIn="false" value="STM32F302x8"/>
+								</option>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.includepaths.80050853" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
+									<listOptionValue builtIn="false" value="../Core/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F3xx_HAL_Driver/Inc/Legacy"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F3xx/Include"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.input.cpp.1894438002" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.input.cpp"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1825507116" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1534392872" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script.368595293" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F302R8TX_FLASH.ld}" valueType="string"/>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.input.1110190289" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.input">
+									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+								</inputType>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.929067676" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1970018870" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1568077345" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1956906771" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.673274040" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1563045381" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1843229380" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1923765454" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
+						</toolChain>
+					</folderInfo>
+					<sourceEntries>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
+					</sourceEntries>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="nucleo-stm32f302r8.null.857877303" name="nucleo-stm32f302r8"/>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.13615456;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.179906366">
+			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
+		</scannerConfigBuildInfo>
+		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.781944678;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.input.cpp.1993709501">
+			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
+		</scannerConfigBuildInfo>
+		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.642164503;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.input.cpp.1894438002">
+			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
+		</scannerConfigBuildInfo>
+		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1815780605;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1645274246">
+			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="refreshScope"/>
+</cproject>

.gitignore

@@ -0,0 +1,2 @@
+Debug
+Drivers

.project

@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>nucleo-stm32f302r8</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+</projectDescription>

.settings/com.st.stm32cube.ide.mcu.sfrview.prefs

@@ -0,0 +1,2 @@
+eclipse.preferences.version=1
+sfrviewstate={"fFavorites"\:{"fLists"\:{}},"fProperties"\:{"fNodeProperties"\:{}}}

.settings/language.settings.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<project>
+	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256" name="Debug">
+		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
+			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
+			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
+			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
+			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1661401494862122411" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+				<language-scope id="org.eclipse.cdt.core.gcc"/>
+				<language-scope id="org.eclipse.cdt.core.g++"/>
+			</provider>
+		</extension>
+	</configuration>
+	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.2056495364" name="Release">
+		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
+			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
+			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
+			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
+			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1661401494862122411" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+				<language-scope id="org.eclipse.cdt.core.gcc"/>
+				<language-scope id="org.eclipse.cdt.core.g++"/>
+			</provider>
+		</extension>
+	</configuration>
+</project>

.settings/org.eclipse.core.resources.prefs

@@ -0,0 +1,2 @@
+eclipse.preferences.version=1
+encoding/<project>=UTF-8

.settings/stm32cubeide.project.prefs

@@ -0,0 +1,4 @@
+66BE74F758C12D739921AEA421D593D3=2
+8DF89ED150041C4CBC7CB9A9CAA90856=0C14243A7D100526649B736739133163
+DC22A860405A8BF2F2C095E5B6529F12=0C14243A7D100526649B736739133163
+eclipse.preferences.version=1

Core/Inc/at45db041.h

@@ -0,0 +1,120 @@
+/*
+ * at45db041.h
+ *
+ *  Created on: Apr 26, 2024
+ *      Author: ngrigoriadis
+ */
+
+#ifndef AT45DB041_H_
+#define AT45DB041_H_
+
+#include "main.h"
+
+/*Define the page size*/
+#define BINARY_PAGE_SIZE
+
+/*Define status register bits*/
+#define RDY_BIT							0x80 /*Device is busy=0, Device is ready=1*/
+#define RES_BIT					        0x40 /*Reserved for future use*/
+#define EPE_BIT                         0x20 /*Success program/erase=0, Failure erase/program=1*/
+#define SLE_BIT                         0x08 /*Sector LockDown disable=0, Sector LockDown enable=1*/
+#define PS2_BIT                         0x04 /*Program suspend status (Buffer 2)*/
+#define PS1_BIT                         0x02 /*Program suspend status (Buffer 1)*/
+#define ES_BIT                          0x01 /*Erase suspend*/
+#define PGS_BIT                         0x01 /*Page size configuration, 0=264, 1=256*/
+#define PRCT_BIT                        0x02 /*Sector protection status*/
+#define COMP_BIT                        0x40 /*Compare result*/
+
+/*Define OPCODES for external flash memory*/
+#define MAN_ID_OPCD						0x9F
+#define SOFT_RST_CMD_1					0xF0
+#define SOFT_RST_CMD_2					0x00
+#define SOFT_RST_CMD_3					0x00
+#define SOFT_RST_CMD_4					0x00
+#define CHIP_ERASE_1					0xC7
+#define CHIP_ERASE_2					0x94
+#define CHIP_ERASE_3					0x80
+#define CHIP_ERASE_4					0x9A
+#define DEEP_SLEEP						0xB9
+#define WAKE_UP_DEEP_SLEEP				0xAB
+#define ULTRA_DEEP_SLEEP				0x79
+#define STATUS_REGISTER					0xD7
+#define CONTINUOUS_ARRAY_READ			0xE8
+#define CONTINUOUS_ARRAY_READ_H_MODE1	0x1B
+#define CONTINUOUS_ARRAY_READ_H_MODE2	0x0B
+#define ENABLE_SECTOR_PROTECTION_1		0x3D
+#define ENABLE_SECTOR_PROTECTION_2		0x2A
+#define ENABLE_SECTOR_PROTECTION_3		0x7F
+#define ENABLE_SECTOR_PROTECTION_4		0x9A
+#define DISABLE_SECTOR_PROTECTION_1		0X3D
+#define DISABLE_SECTOR_PROTECTION_2		0x2A
+#define DISABLE_SECTOR_PROTECTION_3		0x7F
+#define DISABLE_SECTOR_PROTECTION_4		0x9A
+#define INTERNAL_BUFFER_1				0x84
+#define SECTOR_ERASE					0x7C
+#define BUFFER_TO_MAIN_1				0x83
+#define BUFFER_TO_MAIN_2				0x86
+#define PAGE_ERASE_CMD					0x81
+#define BIN_PG_SIZE_1					0x3D
+#define BIN_PG_SIZE_2					0x2A
+#define BIN_PG_SIZE_3					0x80
+#define BIN_PG_SIZE_4					0xA6
+#define BUFFER_2_READ_BINARY			0xD6
+
+#define FLASH_CS_PORT GPIOB
+#define FLASH_CS_PIN  GPIO_PIN_6
+#define FLASH_CS_ENABLE()  HAL_GPIO_WritePin(FLASH_CS_PORT, FLASH_CS_PIN, GPIO_PIN_RESET)
+#define FLASH_CS_DISABLE() HAL_GPIO_WritePin(FLASH_CS_PORT, FLASH_CS_PIN, GPIO_PIN_SET)
+
+#define PAGE_SHIFT   8   // если binary mode
+//#define PAGE_SHIFT   9 // если standard mode
+
+
+/**
+ * @brief Enumerators about MAN ID.
+ */
+typedef enum {
+	DEV_ID_ERROR = 0,
+	DEV_ID_OK	 = 1,
+}dev_id_t;
+
+/**
+ * @brief Information about the operation of the external flash.
+ */
+typedef enum {
+	_DEEP_SLEEP   = 0,
+	_U_DEEP_SLEEP = 1,
+	_NORMAL_MODE  = 2,
+}at45db_op_info_t;
+
+/**
+ * @brief Basic parameters for the external flash memory.
+ */
+typedef struct at45db_ {
+	at45db_op_info_t state;
+	int flash_mbit;
+	int page_size;
+	int blocks;
+	int block_size;
+}at45db_t;
+
+void at45db_init(void);
+dev_id_t at45db_read_man_id(void);
+uint8_t at45db_get_status(void);
+uint16_t at45db_get_page_size(void);
+void at45db_chip_erase(void);
+void at45db_sector_erase(uint8_t sector_num);
+void at45db_page_erase(uint16_t page);
+void at45db_deep_sleep(at45db_t *info);
+void at45db_page_size_conf(uint16_t mode);
+uint16_t at45db_wake_up_from_deep_sleep(at45db_t info);
+void at45db_ultra_deep_sleep(at45db_t info);
+uint16_t at45db_wake_up_from_ultra_deep_sleep(at45db_t info);
+void at45db_read_data(uint32_t address, uint8_t *data, uint16_t size);
+int at45db_is_ready(void);
+uint16_t at45db_fault_check(void);
+void at45db_program(uint32_t addr, uint8_t *buffer, uint16_t size);
+void at45db_read_continuous(uint32_t addr, uint8_t *buffer, uint32_t size);
+int is_device_busy(void);
+
+#endif /* AT45DB041_H_ */

Core/Inc/main.h

@@ -0,0 +1,79 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define B1_Pin GPIO_PIN_13
+#define B1_GPIO_Port GPIOC
+#define TMS_Pin GPIO_PIN_13
+#define TMS_GPIO_Port GPIOA
+#define TCK_Pin GPIO_PIN_14
+#define TCK_GPIO_Port GPIOA
+#define SWO_Pin GPIO_PIN_3
+#define SWO_GPIO_Port GPIOB
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

Core/Inc/periph.h

@@ -0,0 +1,10 @@
+#ifndef PERIPH_H
+#define PERIPH_H
+
+#include "stm32f3xx_hal.h"
+
+extern SPI_HandleTypeDef hspi2;
+extern UART_HandleTypeDef huart2;
+extern TIM_HandleTypeDef htim1;
+
+#endif /* PERIPH_H */

Core/Inc/stm32f3xx_hal_conf.h

@@ -0,0 +1,359 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CONF_H
+#define __STM32F3xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+
+#define HAL_MODULE_ENABLED
+  /*#define HAL_ADC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_PCCARD_MODULE_ENABLED   */
+/*#define HAL_SRAM_MODULE_ENABLED   */
+/*#define HAL_HRTIM_MODULE_ENABLED   */
+/*#define HAL_OPAMP_MODULE_ENABLED   */
+/*#define HAL_SDADC_MODULE_ENABLED   */
+/*#define HAL_TSC_MODULE_ENABLED   */
+/*#define HAL_COMP_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_DAC_MODULE_ENABLED   */
+/*#define HAL_I2S_MODULE_ENABLED   */
+/*#define HAL_IWDG_MODULE_ENABLED   */
+/*#define HAL_LCD_MODULE_ENABLED   */
+/*#define HAL_LPTIM_MODULE_ENABLED   */
+/*#define HAL_RNG_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+  *        Timeout value
+  */
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+  *        Timeout value
+  */
+#if !defined  (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  ((uint32_t)40000)
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Time out for LSE start up value in ms.
+  */
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  *        - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
+  *        - External clock not generated on EVAL 373
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                   ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  INSTRUCTION_CACHE_ENABLE     0
+#define  DATA_CACHE_ENABLE            0
+#define USE_SPI_CRC                     0U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_HRTIM_REGISTER_CALLBACKS       0U /* HRTIM register callback disabled     */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+#define  USE_HAL_OPAMP_REGISTER_CALLBACKS       0U /* OPAMP register callback disabled     */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f3xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f3xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f3xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f3xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f3xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f3xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f3xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f3xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f3xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f3xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f3xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f3xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f3xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f3xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f3xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f3xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SDADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_sdadc.h"
+#endif /* HAL_SDADC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f3xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f3xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f3xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f3xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CONF_H */

Core/Inc/stm32f3xx_it.h

@@ -0,0 +1,66 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_IT_H
+#define __STM32F3xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_IT_H */

Core/Src/at45db041.c

@@ -0,0 +1,497 @@
+#include "at45db041.h"
+#include "periph.h"
+
+#include <memory.h>
+#include <stdio.h>
+
+/*Make the buffer visible for the external flash*/
+extern uint8_t SPI_REC_BUF[512];
+
+/*Information structure*/
+at45db_t AT45DB;
+
+/**
+ * @brief Initialize the external flash, with basic parameters and checks its availability.
+ * @retval None.
+ */
+void at45db_init()
+{
+	memset(&AT45DB, 0, sizeof(AT45DB));
+
+	uint16_t res = -1;
+    uint8_t status_register[2] = {0};
+
+    /*Check if the external flash memory is accessible*/
+    res = at45db_read_man_id();
+    printf("device.man.id: 0x%02X\r\n", res);
+    if (!res)
+   {
+	   /*External flash memory is not accessible*/
+	   printf("Unable to communicate with external flash. Initiate wake up process!\r\n");
+
+	   /*Wake up process*/
+	   res = at45db_wake_up_from_deep_sleep(AT45DB);
+	   if (!res)
+	   {
+		   /*Device could be in ultra deep sleep*/
+		   res = at45db_wake_up_from_ultra_deep_sleep(AT45DB);
+		   if (!res)
+		   {
+				printf("Cannot wake up the external flash from ultra deep sleep\r\n");
+		   }
+		   else if (res)
+		   {
+				printf("External flash memory woke up from ultra deep sleep\r\n");
+		   }
+	   }
+	else if (res)
+	   {
+		   printf("External flash memory wake up from power down mode\r\n");
+	   }
+   }
+   else if (res)
+   {
+		printf("Correct device ID, external flash memory is accessible\r\n");
+   }
+
+    HAL_Delay(100);
+
+    /*Initializa information structure*/
+#ifdef BINARY_PAGE_SIZE
+    AT45DB.block_size = 2048;
+    AT45DB.blocks     = 256;
+    AT45DB.flash_mbit = 4;
+    AT45DB.page_size  = 256;
+#endif
+
+#ifdef DATAFLASH_PAGE_SIZE
+    AT45DB->block_size = 2112;
+    AT45DB->blocks     = 256;
+    AT45DB->flash_mbit = 4;
+    AT45DB->page_size  = 264;
+#endif
+}
+
+/**
+ * @brief Считывает один байт статус-регистра AT45DB041E.
+ * @retval 1 байт статуса.
+ *
+ * Бит 7 (0x80) — RDY/BUSY: 1 = готов, 0 = занят
+ * Бит 0 (0x01) — Page Size: 1 = binary (256 байт), 0 = standard (264 байта)
+ */
+uint8_t at45db_get_status(void)
+{
+    uint8_t cmd = STATUS_REGISTER;
+    uint8_t status = 0;
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, &cmd, 1, HAL_MAX_DELAY);
+    HAL_SPI_Receive(&hspi2, &status, 1, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+
+    return status;
+}
+
+/**
+ * @brief Читает Manufacturer + Device ID.
+ * @retval DEV_ID_OK или DEV_ID_ERROR.
+ */
+dev_id_t at45db_read_man_id(void)
+{
+    uint8_t opcode = MAN_ID_OPCD;
+    uint8_t rec_buf[4] = {0};
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, &opcode, 1, HAL_MAX_DELAY);
+    HAL_SPI_Receive(&hspi2, rec_buf, 4, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+
+    if (rec_buf[0] != 0x1F || rec_buf[1] != 0x24)
+        return DEV_ID_ERROR;
+
+    return DEV_ID_OK;
+}
+
+/**
+ * @brief Проверяет текущий режим размера страницы.
+ * @retval 256 если включён binary mode, 264 — если стандартный.
+ */
+uint16_t at45db_get_page_size(void)
+{
+    return (at45db_get_status() & 0x01) ? 256 : 264;
+}
+
+/**
+ * @brief Проверяет, готов ли чип к новой операции.
+ * @retval 1 — готов, 0 — занят.
+ */
+int at45db_is_ready(void)
+{
+    return (at45db_get_status() & 0x80) ? 1 : 0;
+}
+
+/**
+ * @brief Wakes up external flash from deep sleep mode.
+ * @param info : Structure information about the external flash operation.
+ * @retval 1 for success, 0 on failure.
+ */
+uint16_t at45db_wake_up_from_deep_sleep(at45db_t info)
+{
+    uint16_t res = -1;
+    uint8_t cmd = WAKE_UP_DEEP_SLEEP;
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, &cmd, 1, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+
+    // TODO: fix
+    /*Return the MISO pin to its initial state*/
+//	SET_BIT(GPIO_SPIx->MODER, (1U<<(SPIx_GPIO_MISO_PIN*2+1)));
+//	CLEAR_BIT(GPIO_SPIx->MODER, (1U<<SPIx_GPIO_MISO_PIN*2));
+
+    /*Read MAN-ID*/
+    res = at45db_read_man_id();
+    if (!res)
+    {
+         return 0;
+    }
+
+    info.state = _NORMAL_MODE;
+    return 1;
+}
+
+/**
+ * @brief Exit from ultra deep sleep.
+ * @param info : Structure information about the external flash operation.
+ * @retval 1 for success, 0 on failure.
+ */
+uint16_t at45db_wake_up_from_ultra_deep_sleep(at45db_t info)
+{
+    uint16_t res = -1;
+
+    /*Select the device*/
+    FLASH_CS_ENABLE();
+
+    HAL_Delay(2);
+
+    /*Release the device*/
+    FLASH_CS_DISABLE();
+
+    // TODO: fix
+    /*Return the MISO pin to its initial state*/
+//    SET_BIT(GPIO_SPIx->MODER, (1U<<(SPIx_GPIO_MISO_PIN*2+1)));
+//    CLEAR_BIT(GPIO_SPIx->MODER, (1U<<SPIx_GPIO_MISO_PIN*2));
+
+    /*Try to read MAD-ID*/
+    res = at45db_read_man_id();
+    if (!res)
+    {
+        /*Failure*/
+        return 0;
+    }
+
+    /*Success*/
+    info.state = _NORMAL_MODE;
+
+    return 1;
+}
+
+/**
+ * @brief This functions performs a contineus array read inside the main memory of the external flash.
+ * It starts from the specified address and continues to the next address if the size is long enough in order to take
+ * information from the next addresses.
+ * @param address : This is the starting address of the main memory you want to start reading from.
+ * @param data    : The buffer that will contain the return data from the main memory of the flash.
+ * @param size    : The size of data that you want to read.
+ * @retval None.
+ */
+void at45db_read_data(uint32_t address, uint8_t *data, uint16_t size)
+{
+    uint8_t address_bytes[5];
+
+    /*Set the address bytes*/
+    address_bytes[0] = CONTINUOUS_ARRAY_READ_H_MODE2;
+    address_bytes[1] = ((address >> 16) & 0xFF);
+    address_bytes[2] = ((address >> 8) & 0xFF);
+    address_bytes[3] = (address & 0xFF);
+    address_bytes[4] = 0;
+
+    /*Select the device*/
+    FLASH_CS_ENABLE();
+
+    /*Transmit the address bytes*/
+    HAL_SPI_Transmit(&hspi2, address_bytes, 4, HAL_MAX_DELAY);
+
+    /*Receive the data from the external flash memory*/
+    HAL_SPI_Receive(&hspi2, data, size, HAL_MAX_DELAY);
+
+    /*Release the slave device*/
+    FLASH_CS_DISABLE();
+}
+
+/**
+ * @brief Enter flash into ultra deep sleep.
+ * @param info : Structure information about the external flash operation.
+ * @retval None.
+ */
+void at45db_ultra_deep_sleep(at45db_t info)
+{
+    uint8_t opcode = ULTRA_DEEP_SLEEP;
+
+    /*Select the slave device*/
+    FLASH_CS_ENABLE();
+
+    /*Transmit the proper opcode*/
+    HAL_SPI_Transmit(&hspi2, &opcode, 1, HAL_MAX_DELAY);
+
+    /*Give some time to the system*/
+    HAL_Delay(100);
+
+    /*Release the device*/
+    FLASH_CS_DISABLE();
+
+    // TODO: fix
+    /*Make the MISO pin analog, for power saving*/
+//    SET_BIT(GPIO_SPIx->MODER, (1U<<(SPIx_GPIO_MISO_PIN*2+1)));
+//    SET_BIT(GPIO_SPIx->MODER, (1U<<(SPIx_GPIO_MISO_PIN*2)));
+
+    info.state = _U_DEEP_SLEEP;
+
+}
+
+
+/**
+ * @brief This function performs a programming operation into the main memory of the external flash
+ * using the internal buffer 1 with built in erase operation.
+ * @param addr  : The starting address of the main memory.
+ * @param buffer: The buffer that holds the data which will be stored inside the main memory.
+ * @param size  : The size of the data.
+ * @retval None.
+ */
+void at45db_program(uint32_t addr, uint8_t *buffer, uint16_t size)
+{
+    /*Load data into Buffer 1*/
+    uint8_t loadCommand[4];
+    loadCommand[0] = 0x84; // Buffer 1 Write opcode
+    loadCommand[1] = 0x00;			// Dummy byte
+    loadCommand[2] = 0x00;			// Dummy byte
+    loadCommand[3] = 0x00;			// Buffer starting address
+
+    /*Select the external flash memory*/
+    FLASH_CS_ENABLE();
+
+    /*Send the proper command & data to the internal buffer 1*/
+    HAL_SPI_Transmit(&hspi2, loadCommand, 4, HAL_MAX_DELAY);
+    HAL_SPI_Receive(&hspi2, (uint8_t *)buffer, size, HAL_MAX_DELAY);
+
+    /*Deselect the flash memory*/
+    FLASH_CS_DISABLE();
+
+    /*Program Buffer 1 to Main Memory Page with Built-In Erase*/
+    uint8_t programCommand[4];
+    programCommand[0] = 0x83;	// Buffer 1 to Main Memory Page Program with Built-In Erase opcode
+    programCommand[1] = (addr >> 16) & 0xFF;	// Address byte 1
+    programCommand[2] = (addr >> 8) & 0xFF;		// Address byte 2
+    programCommand[3] = addr & 0xFF;			// Address byte 3
+
+    /*Select the external flash memory*/
+    FLASH_CS_ENABLE();
+
+    /*Program the main memory. Send contents of buffer 1 to main memory*/
+    HAL_SPI_Transmit(&hspi2, programCommand, 4, HAL_MAX_DELAY);
+
+    /*Deselect the flash memory*/
+    FLASH_CS_DISABLE();
+
+
+    int is_ready = at45db_is_ready();
+
+    while (!is_ready) {}
+}
+
+void at45db_read_continuous(uint32_t addr, uint8_t *buffer, uint32_t size)
+{
+    uint8_t cmd[8];
+
+    /*Preparing the command*/
+    cmd[0] = 0xE8;  //Opcode
+    cmd[1] = (addr >> 16) & 0xFF;           // Address byte 1
+    cmd[2] = (addr >> 8) & 0xFF;            // Address byte 2
+    cmd[3] = addr & 0xFF;                   // Address byte 3
+    cmd[4] = 0x00;                          // Dummy byte 1
+    cmd[5] = 0x00;                          // Dummy byte 2
+    cmd[6] = 0x00;                          // Dummy byte 3
+    cmd[7] = 0x00;                          // Dummy byte 4
+
+    /*Select the external flash memory*/
+    FLASH_CS_ENABLE();
+
+    /*Send the proper commands to load data to the internal buffer 1*/
+    HAL_SPI_Transmit(&hspi2, cmd, sizeof(cmd), HAL_MAX_DELAY);
+
+    /*Receive the data*/
+    HAL_SPI_Receive(&hspi2, buffer, size, HAL_MAX_DELAY);
+
+    /*Deselect the external flash memory*/
+    FLASH_CS_DISABLE();
+}
+
+/**
+ * @brief Configure page size. Careful you only have 10000 times to do that.
+ * @param mode      : Set 1 for DataFlash (264 bytes), 2 for Binary (256 bytes).
+ * @retval None.
+ */
+void at45db_page_size_conf(uint16_t mode)
+{
+    uint8_t cmd[4] = {0};
+    cmd[0] = 0x3D;
+    cmd[1] = 0x2A;
+    cmd[2] = 0x80;
+
+    /*Check user input*/
+    if (mode == 1)
+    {
+        /*Data flash page size*/
+        cmd[3] = 0xA7;
+        FLASH_CS_ENABLE();
+        HAL_SPI_Transmit(&hspi2, cmd, sizeof(cmd), HAL_MAX_DELAY);
+        FLASH_CS_DISABLE();
+    }
+    else if (mode == 2)
+    {
+        /*Binary page size*/
+        cmd[3] = 0xA6;
+        FLASH_CS_ENABLE();
+        HAL_SPI_Transmit(&hspi2, cmd, sizeof(cmd), HAL_MAX_DELAY);
+        FLASH_CS_DISABLE();
+    }
+}
+
+/**
+ * @brief Perform chip erase. This command erase the entire main memory.
+ * @retval None.
+ */
+void at45db_chip_erase(void)
+{
+    uint8_t cmd[4] = {0};
+    int res = -1;
+
+    cmd[0] = CHIP_ERASE_1;
+    cmd[1] = CHIP_ERASE_2;
+    cmd[2] = CHIP_ERASE_3;
+    cmd[3] = CHIP_ERASE_4;
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, cmd, 4, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+
+    /*Check for fault operation*/
+    res = at45db_fault_check();
+
+	if (res == 1)
+	{
+        printf("There was a fault in erase operation...\n\r");
+    }
+	else if (res == 0) {
+        printf("Successful, erase operation...\n\r");
+    }
+}
+
+/**
+ * @brief Checks if a fault erased after an erase or program operation.
+ * @retval 1 if an error is detected, 0 otherwise.
+ */
+uint16_t at45db_fault_check(void)
+{
+    uint8_t status_register[2];
+    uint8_t opcode = STATUS_REGISTER;
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, &opcode, 1, HAL_MAX_DELAY);
+    HAL_SPI_Receive(&hspi2, status_register, 2, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+
+    /*Check the 5th bit of the second byte EPE bit*/
+    if ((status_register[1] & EPE_BIT)) {
+
+        /*Error detected*/
+        return 1;
+    }
+
+    /*Success, in erasing external flash memory*/
+    return 0;
+}
+
+/**
+ * @brief This function erases a sector inside the external memory.
+ * @param sector_num  :  This is the number of the sector you need to erase.
+ * @retval None.
+ */
+void at45db_sector_erase(uint8_t sector_num)
+{
+    uint8_t opcode = SECTOR_ERASE;
+    uint8_t address_byte[3];
+
+    address_byte[0] = ((sector_num) << 3) & 0xF8;
+    address_byte[1] = 0x00;
+    address_byte[2] = 0x00;
+
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, &opcode, 1, HAL_MAX_DELAY);
+    HAL_SPI_Transmit(&hspi2, address_byte, 3, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+}
+
+/**
+ * @brief Erases a specific page inside the main memory.
+ * @reval None.
+ */
+void at45db_page_erase(uint16_t page)
+{
+    uint8_t cmd[3] = {0};
+    uint8_t opcode = PAGE_ERASE_CMD;
+    page = page << 9;
+
+    FLASH_CS_ENABLE();
+    HAL_SPI_Transmit(&hspi2, &opcode, 1, HAL_MAX_DELAY);
+
+    /*Modify the proper data bits*/
+    cmd[0] = (page >> 16) & 0xFF;
+    cmd[1] = (page >> 8) & 0xFF;
+    cmd[2] = page & 0xFF;
+
+    HAL_SPI_Transmit(&hspi2, cmd, 3, HAL_MAX_DELAY);
+    FLASH_CS_DISABLE();
+}
+
+/**
+ * @brief Enter flash into deep sleep mode.
+ * @param info : Structure information about the external flash operation.
+ * @retval None.
+ */
+void at45db_deep_sleep(at45db_t *info)
+{
+    uint8_t opcode = DEEP_SLEEP;
+
+    /*Select the device*/
+    FLASH_CS_ENABLE();
+
+    /*Transmit the command the external FLASH memory*/
+    HAL_SPI_Transmit(&hspi2, &opcode, 1, HAL_MAX_DELAY);
+
+    /*Give some time to process*/
+    HAL_Delay(100);
+
+    /*Release the slave device*/
+    FLASH_CS_DISABLE();
+
+    /*Give some time to the system*/
+    HAL_Delay(2);
+
+    //TODO: fix
+    /*Make the MISO pin analog, for power saving*/
+//    SET_BIT(GPIO_SPIx->MODER, (1U<<(SPIx_GPIO_MISO_PIN*2+1)));
+//    SET_BIT(GPIO_SPIx->MODER, (1U<<(SPIx_GPIO_MISO_PIN*2)));
+
+}

Core/Src/main.c

@@ -0,0 +1,424 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+#include "periph.h"
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+SPI_HandleTypeDef hspi2;
+
+TIM_HandleTypeDef htim1;
+
+UART_HandleTypeDef huart2;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_SPI2_Init(void);
+static void MX_USART2_UART_Init(void);
+static void MX_TIM1_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+#include "at45db041.h"
+
+#include <stdio.h>
+
+int _write(int file, char *ptr, int len) {
+    HAL_UART_Transmit(&huart2, (uint8_t*)ptr, len, HAL_MAX_DELAY);
+    return len;
+}
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_SPI2_Init();
+  MX_USART2_UART_Init();
+  MX_TIM1_Init();
+  /* USER CODE BEGIN 2 */
+
+  at45db_init();
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+	  printf("=== AT45DB041E Test ===\r\n");
+
+	  uint8_t is_ready = at45db_is_ready();
+
+	  if (is_ready)
+	  {
+		  printf("Device READY\r\n");
+	  }
+	  else
+	  {
+		printf("Device BUSY\r\n");
+		continue;
+	  }
+
+	  dev_id_t id = at45db_read_man_id();
+	  if (id == DEV_ID_OK)
+	      printf("Manufacturer ID OK\r\n");
+	  else
+	      printf("Manufacturer ID ERROR\r\n");
+
+	  uint8_t status = at45db_get_status();
+	  printf("Status: 0x%02X\r\n", status);
+	  printf("Page size: %u bytes\r\n", at45db_get_page_size());
+
+	  HAL_Delay(1000);
+
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_TIM1;
+  PeriphClkInit.Tim1ClockSelection = RCC_TIM1CLK_HCLK;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief SPI2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_SPI2_Init(void)
+{
+
+  /* USER CODE BEGIN SPI2_Init 0 */
+
+  /* USER CODE END SPI2_Init 0 */
+
+  /* USER CODE BEGIN SPI2_Init 1 */
+
+  /* USER CODE END SPI2_Init 1 */
+  /* SPI2 parameter configuration*/
+  hspi2.Instance = SPI2;
+  hspi2.Init.Mode = SPI_MODE_MASTER;
+  hspi2.Init.Direction = SPI_DIRECTION_2LINES;
+  hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
+  hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
+  hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
+  hspi2.Init.NSS = SPI_NSS_SOFT;
+  hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+  hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
+  hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  hspi2.Init.CRCPolynomial = 7;
+  hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+  hspi2.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
+  if (HAL_SPI_Init(&hspi2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SPI2_Init 2 */
+
+  /* USER CODE END SPI2_Init 2 */
+
+}
+
+/**
+  * @brief TIM1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM1_Init(void)
+{
+
+  /* USER CODE BEGIN TIM1_Init 0 */
+
+  /* USER CODE END TIM1_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
+
+  /* USER CODE BEGIN TIM1_Init 1 */
+
+  /* USER CODE END TIM1_Init 1 */
+  htim1.Instance = TIM1;
+  htim1.Init.Prescaler = 0;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.Period = 65535;
+  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim1.Init.RepetitionCounter = 0;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
+  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
+  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
+  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
+  sBreakDeadTimeConfig.DeadTime = 0;
+  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
+  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
+  sBreakDeadTimeConfig.BreakFilter = 0;
+  sBreakDeadTimeConfig.Break2State = TIM_BREAK2_DISABLE;
+  sBreakDeadTimeConfig.Break2Polarity = TIM_BREAK2POLARITY_HIGH;
+  sBreakDeadTimeConfig.Break2Filter = 0;
+  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
+  if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM1_Init 2 */
+
+  /* USER CODE END TIM1_Init 2 */
+  HAL_TIM_MspPostInit(&htim1);
+
+}
+
+/**
+  * @brief USART2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART2_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART2_Init 0 */
+
+  /* USER CODE END USART2_Init 0 */
+
+  /* USER CODE BEGIN USART2_Init 1 */
+
+  /* USER CODE END USART2_Init 1 */
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = 9600;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+  huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+  if (HAL_UART_Init(&huart2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART2_Init 2 */
+
+  /* USER CODE END USART2_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+/* USER CODE BEGIN MX_GPIO_Init_1 */
+/* USER CODE END MX_GPIO_Init_1 */
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_SET);
+
+  /*Configure GPIO pin : B1_Pin */
+  GPIO_InitStruct.Pin = B1_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PB6 */
+  GPIO_InitStruct.Pin = GPIO_PIN_6;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+/* USER CODE BEGIN MX_GPIO_Init_2 */
+/* USER CODE END MX_GPIO_Init_2 */
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

Core/Src/stm32f3xx_hal_msp.c

@@ -0,0 +1,288 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f3xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+                    /**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0);
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hspi->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspInit 0 */
+
+  /* USER CODE END SPI2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_SPI2_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**SPI2 GPIO Configuration
+    PB13     ------> SPI2_SCK
+    PB14     ------> SPI2_MISO
+    PB15     ------> SPI2_MOSI
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI2_MspInit 1 */
+
+  /* USER CODE END SPI2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+  if(hspi->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspDeInit 0 */
+
+  /* USER CODE END SPI2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI2_CLK_DISABLE();
+
+    /**SPI2 GPIO Configuration
+    PB13     ------> SPI2_SCK
+    PB14     ------> SPI2_MISO
+    PB15     ------> SPI2_MOSI
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
+
+  /* USER CODE BEGIN SPI2_MspDeInit 1 */
+
+  /* USER CODE END SPI2_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief TIM_Base MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspInit 0 */
+
+  /* USER CODE END TIM1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM1_CLK_ENABLE();
+  /* USER CODE BEGIN TIM1_MspInit 1 */
+
+  /* USER CODE END TIM1_MspInit 1 */
+  }
+
+}
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(htim->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspPostInit 0 */
+
+  /* USER CODE END TIM1_MspPostInit 0 */
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**TIM1 GPIO Configuration
+    PA8     ------> TIM1_CH1
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_8;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF6_TIM1;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM1_MspPostInit 1 */
+
+  /* USER CODE END TIM1_MspPostInit 1 */
+  }
+
+}
+/**
+* @brief TIM_Base MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspDeInit 0 */
+
+  /* USER CODE END TIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM1_CLK_DISABLE();
+  /* USER CODE BEGIN TIM1_MspDeInit 1 */
+
+  /* USER CODE END TIM1_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP Initialization
+* This function configures the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(huart->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspInit 0 */
+
+  /* USER CODE END USART2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART2_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART2 GPIO Configuration
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART2_MspInit 1 */
+
+  /* USER CODE END USART2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+  if(huart->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+  /* USER CODE END USART2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART2_CLK_DISABLE();
+
+    /**USART2 GPIO Configuration
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
+
+  /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+  /* USER CODE END USART2_MspDeInit 1 */
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Core/Src/stm32f3xx_it.c

@@ -0,0 +1,203 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f3xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+   while (1)
+  {
+  }
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F3xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f3xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Core/Src/syscalls.c

@@ -0,0 +1,176 @@
+/**
+ ******************************************************************************
+ * @file      syscalls.c
+ * @author    Auto-generated by STM32CubeIDE
+ * @brief     STM32CubeIDE Minimal System calls file
+ *
+ *            For more information about which c-functions
+ *            need which of these lowlevel functions
+ *            please consult the Newlib libc-manual
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2020-2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include <sys/stat.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <stdio.h>
+#include <signal.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/times.h>
+
+
+/* Variables */
+extern int __io_putchar(int ch) __attribute__((weak));
+extern int __io_getchar(void) __attribute__((weak));
+
+
+char *__env[1] = { 0 };
+char **environ = __env;
+
+
+/* Functions */
+void initialise_monitor_handles()
+{
+}
+
+int _getpid(void)
+{
+  return 1;
+}
+
+int _kill(int pid, int sig)
+{
+  (void)pid;
+  (void)sig;
+  errno = EINVAL;
+  return -1;
+}
+
+void _exit (int status)
+{
+  _kill(status, -1);
+  while (1) {}    /* Make sure we hang here */
+}
+
+__attribute__((weak)) int _read(int file, char *ptr, int len)
+{
+  (void)file;
+  int DataIdx;
+
+  for (DataIdx = 0; DataIdx < len; DataIdx++)
+  {
+    *ptr++ = __io_getchar();
+  }
+
+  return len;
+}
+
+__attribute__((weak)) int _write(int file, char *ptr, int len)
+{
+  (void)file;
+  int DataIdx;
+
+  for (DataIdx = 0; DataIdx < len; DataIdx++)
+  {
+    __io_putchar(*ptr++);
+  }
+  return len;
+}
+
+int _close(int file)
+{
+  (void)file;
+  return -1;
+}
+
+
+int _fstat(int file, struct stat *st)
+{
+  (void)file;
+  st->st_mode = S_IFCHR;
+  return 0;
+}
+
+int _isatty(int file)
+{
+  (void)file;
+  return 1;
+}
+
+int _lseek(int file, int ptr, int dir)
+{
+  (void)file;
+  (void)ptr;
+  (void)dir;
+  return 0;
+}
+
+int _open(char *path, int flags, ...)
+{
+  (void)path;
+  (void)flags;
+  /* Pretend like we always fail */
+  return -1;
+}
+
+int _wait(int *status)
+{
+  (void)status;
+  errno = ECHILD;
+  return -1;
+}
+
+int _unlink(char *name)
+{
+  (void)name;
+  errno = ENOENT;
+  return -1;
+}
+
+int _times(struct tms *buf)
+{
+  (void)buf;
+  return -1;
+}
+
+int _stat(char *file, struct stat *st)
+{
+  (void)file;
+  st->st_mode = S_IFCHR;
+  return 0;
+}
+
+int _link(char *old, char *new)
+{
+  (void)old;
+  (void)new;
+  errno = EMLINK;
+  return -1;
+}
+
+int _fork(void)
+{
+  errno = EAGAIN;
+  return -1;
+}
+
+int _execve(char *name, char **argv, char **env)
+{
+  (void)name;
+  (void)argv;
+  (void)env;
+  errno = ENOMEM;
+  return -1;
+}

Core/Src/sysmem.c

@@ -0,0 +1,79 @@
+/**
+ ******************************************************************************
+ * @file      sysmem.c
+ * @author    Generated by STM32CubeIDE
+ * @brief     STM32CubeIDE System Memory calls file
+ *
+ *            For more information about which C functions
+ *            need which of these lowlevel functions
+ *            please consult the newlib libc manual
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include <errno.h>
+#include <stdint.h>
+
+/**
+ * Pointer to the current high watermark of the heap usage
+ */
+static uint8_t *__sbrk_heap_end = NULL;
+
+/**
+ * @brief _sbrk() allocates memory to the newlib heap and is used by malloc
+ *        and others from the C library
+ *
+ * @verbatim
+ * ############################################################################
+ * #  .data  #  .bss  #       newlib heap       #          MSP stack          #
+ * #         #        #                         # Reserved by _Min_Stack_Size #
+ * ############################################################################
+ * ^-- RAM start      ^-- _end                             _estack, RAM end --^
+ * @endverbatim
+ *
+ * This implementation starts allocating at the '_end' linker symbol
+ * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
+ * The implementation considers '_estack' linker symbol to be RAM end
+ * NOTE: If the MSP stack, at any point during execution, grows larger than the
+ * reserved size, please increase the '_Min_Stack_Size'.
+ *
+ * @param incr Memory size
+ * @return Pointer to allocated memory
+ */
+void *_sbrk(ptrdiff_t incr)
+{
+  extern uint8_t _end; /* Symbol defined in the linker script */
+  extern uint8_t _estack; /* Symbol defined in the linker script */
+  extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
+  const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
+  const uint8_t *max_heap = (uint8_t *)stack_limit;
+  uint8_t *prev_heap_end;
+
+  /* Initialize heap end at first call */
+  if (NULL == __sbrk_heap_end)
+  {
+    __sbrk_heap_end = &_end;
+  }
+
+  /* Protect heap from growing into the reserved MSP stack */
+  if (__sbrk_heap_end + incr > max_heap)
+  {
+    errno = ENOMEM;
+    return (void *)-1;
+  }
+
+  prev_heap_end = __sbrk_heap_end;
+  __sbrk_heap_end += incr;
+
+  return (void *)prev_heap_end;
+}

Core/Src/system_stm32f3xx.c

@@ -0,0 +1,287 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f3xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  * 1. This file provides two functions and one global variable to be called from
+  *    user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f3xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f3xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. This file configures the system clock as follows:
+  *=============================================================================
+  *                         Supported STM32F3xx device
+  *-----------------------------------------------------------------------------
+  *        System Clock source                    | HSI
+  *-----------------------------------------------------------------------------
+  *        SYSCLK(Hz)                             | 8000000
+  *-----------------------------------------------------------------------------
+  *        HCLK(Hz)                               | 8000000
+  *-----------------------------------------------------------------------------
+  *        AHB Prescaler                          | 1
+  *-----------------------------------------------------------------------------
+  *        APB2 Prescaler                         | 1
+  *-----------------------------------------------------------------------------
+  *        APB1 Prescaler                         | 1
+  *-----------------------------------------------------------------------------
+  *        USB Clock                              | DISABLE
+  *-----------------------------------------------------------------------------
+  *=============================================================================
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f3xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f3xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Defines
+  * @{
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Uncomment the following line if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
+/* #define VECT_TAB_SRAM */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+
+/******************************************************************************/
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock there is no need to
+               call the 2 first functions listed above, since SystemCoreClock variable is 
+               updated automatically.
+  */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+/* FPU settings --------------------------------------------------------------*/
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+#endif
+
+  /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+  *              8 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case RCC_CFGR_SWS_PLL:  /* PLL used as system clock */
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      pllmull = ( pllmull >> 18) + 2;
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+        predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+      if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+      {
+        /* HSE oscillator clock selected as PREDIV1 clock entry */
+        SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+      }
+      else
+      {
+        /* HSI oscillator clock selected as PREDIV1 clock entry */
+        SystemCoreClock = (HSI_VALUE / predivfactor) * pllmull;
+      }
+#else      
+      if (pllsource == RCC_CFGR_PLLSRC_HSI_DIV2)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+        predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+        /* HSE oscillator clock selected as PREDIV1 clock entry */
+        SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+      }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+      break;
+    default: /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

Core/Startup/startup_stm32f302r8tx.s

@@ -0,0 +1,417 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f302x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F302x6/STM32F302x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+  
+/* Call the clock system initialization function.*/
+    bl  SystemInit
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	USB_HP_CAN_TX_IRQHandler
+	.word	USB_LP_CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	0
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	0
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	0
+	.word	0
+	.word	TIM6_DAC_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_RMP_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_IRQHandler
+	.thumb_set ADC1_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN_TX_IRQHandler
+	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN_RX0_IRQHandler
+	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+	
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+  
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler  
+	
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
+	
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_RMP_IRQHandler
+	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32F302R8TX_FLASH.ld

@@ -0,0 +1,185 @@
+/*
+******************************************************************************
+**
+** @file        : LinkerScript.ld
+**
+** @author      : Auto-generated by STM32CubeIDE
+**
+**  Abstract    : Linker script for NUCLEO-F302R8 Board embedding STM32F302R8Tx Device from stm32f3 series
+**                      64KBytes FLASH
+**                      16KBytes RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+******************************************************************************
+** @attention
+**
+** Copyright (c) 2025 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+  RAM    (xrw)    : ORIGIN = 0x20000000,   LENGTH = 16K
+  FLASH    (rx)    : ORIGIN = 0x8000000,   LENGTH = 64K
+}
+
+/* Sections */
+SECTIONS
+{
+  /* The startup code into "FLASH" Rom type memory */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data into "FLASH" Rom type memory */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data into "FLASH" Rom type memory */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : {
+    . = ALIGN(4);
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM : {
+    . = ALIGN(4);
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+    . = ALIGN(4);
+  } >FLASH
+
+  .preinit_array     :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  .init_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  .fini_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  /* Used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections into "RAM" Ram type memory */
+  .data :
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+    *(.RamFunc)        /* .RamFunc sections */
+    *(.RamFunc*)       /* .RamFunc* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+
+  } >RAM AT> FLASH
+
+  /* Uninitialized data section into "RAM" Ram type memory */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough "RAM" Ram  type memory left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  /* Remove information from the compiler libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}

nucleo-stm32f302r8 Debug.launch

@@ -0,0 +1,83 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.st.stm32cube.ide.mcu.debug.launch.launchConfigurationType">
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.access_port_id" value="0"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.cubeprog_external_loaders" value="[]"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_certif_path" value=""/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_check_enable" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_key_path" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_permission" value="debug_non_secure_L3"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_live_expr" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/>
+    <intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.ip_address_local" value="localhost"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.enabled" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.value" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.loadList" value="{&quot;fItems&quot;:[{&quot;fIsFromMainTab&quot;:true,&quot;fPath&quot;:&quot;Debug/nucleo-stm32f302r8.elf&quot;,&quot;fProjectName&quot;:&quot;nucleo-stm32f302r8&quot;,&quot;fPerformBuild&quot;:true,&quot;fDownload&quot;:true,&quot;fLoadSymbols&quot;:true}]}"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.override_start_address_mode" value="default"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startServer" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.divby0" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.unaligned" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.haltonexception" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="64000000"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.vector_table" value=""/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.verify_flash_download" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_allow_halt" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_signal_halt" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_logging" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_max_halt_delay" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.frequency" value="0"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.halt_all_on_reset" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="C:\vault\docs\STM32CubeIDE\workspace_1.14.1\nucleo-stm32f302r8\Debug\st-link_gdbserver_log.txt"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.low_power_debug" value="enable"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.max_halt_delay" value="2"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.reset_strategy" value="connect_under_reset"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.watchdog_config" value="none"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkenable_rtos" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkrestart_configurations" value="{&quot;fVersion&quot;:1,&quot;fItems&quot;:[{&quot;fDisplayName&quot;:&quot;Reset&quot;,&quot;fIsSuppressible&quot;:false,&quot;fResetAttribute&quot;:&quot;Software system reset&quot;,&quot;fResetStrategies&quot;:[{&quot;fDisplayName&quot;:&quot;Software system reset&quot;,&quot;fLaunchAttribute&quot;:&quot;system_reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset\r\n&quot;],&quot;fCmdOptions&quot;:[&quot;-g&quot;]},{&quot;fDisplayName&quot;:&quot;Hardware reset&quot;,&quot;fLaunchAttribute&quot;:&quot;hardware_reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset hardware\r\n&quot;],&quot;fCmdOptions&quot;:[&quot;-g&quot;]},{&quot;fDisplayName&quot;:&quot;Core reset&quot;,&quot;fLaunchAttribute&quot;:&quot;core_reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset core\r\n&quot;],&quot;fCmdOptions&quot;:[&quot;-g&quot;]},{&quot;fDisplayName&quot;:&quot;None&quot;,&quot;fLaunchAttribute&quot;:&quot;no_reset&quot;,&quot;fGdbCommands&quot;:[],&quot;fCmdOptions&quot;:[&quot;-g&quot;]}],&quot;fGdbCommandGroup&quot;:{&quot;name&quot;:&quot;Additional commands&quot;,&quot;commands&quot;:[]},&quot;fStartApplication&quot;:true}]}"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.enableRtosProxy" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyCustomProperties" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriver" value="threadx"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverAuto" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverPort" value="cortex_m0"/>
+    <intAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyPort" value="60000"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDeviceId" value="com.st.stm32cube.ide.mcu.debug.stlink"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+    <intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="61234"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+    <stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+    <booleanAttribute key="org.eclipse.cdt.dsf.gdb.NON_STOP" value="false"/>
+    <booleanAttribute key="org.eclipse.cdt.dsf.gdb.UPDATE_THREADLIST_ON_SUSPEND" value="false"/>
+    <intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+    <stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+    <stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/>
+    <booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
+    <stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+    <stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/nucleo-stm32f302r8.elf"/>
+    <stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="nucleo-stm32f302r8"/>
+    <booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+    <stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.825676256"/>
+    <booleanAttribute key="org.eclipse.debug.core.ATTR_FORCE_SYSTEM_CONSOLE_ENCODING" value="false"/>
+    <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+        <listEntry value="/nucleo-stm32f302r8"/>
+    </listAttribute>
+    <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+        <listEntry value="4"/>
+    </listAttribute>
+    <stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;memoryBlockExpressionList context=&quot;reserved-for-future-use&quot;/&gt;"/>
+    <stringAttribute key="process_factory_id" value="com.st.stm32cube.ide.mcu.debug.launch.HardwareDebugProcessFactory"/>
+</launchConfiguration>

nucleo-stm32f302r8.ioc

@@ -0,0 +1,200 @@
+#MicroXplorer Configuration settings - do not modify
+CAD.formats=
+CAD.pinconfig=
+CAD.provider=
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
+Mcu.CPN=STM32F302R8T6
+Mcu.Family=STM32F3
+Mcu.IP0=NVIC
+Mcu.IP1=RCC
+Mcu.IP2=SPI2
+Mcu.IP3=SYS
+Mcu.IP4=TIM1
+Mcu.IP5=USART2
+Mcu.IPNb=6
+Mcu.Name=STM32F302R(6-8)Tx
+Mcu.Package=LQFP64
+Mcu.Pin0=PC13
+Mcu.Pin1=PC14 - OSC32_IN
+Mcu.Pin10=PA8
+Mcu.Pin11=PA13
+Mcu.Pin12=PA14
+Mcu.Pin13=PB3
+Mcu.Pin14=PB6
+Mcu.Pin15=VP_SYS_VS_Systick
+Mcu.Pin16=VP_TIM1_VS_ClockSourceINT
+Mcu.Pin2=PC15 - OSC32_OUT
+Mcu.Pin3=PF0-OSC_IN
+Mcu.Pin4=PF1-OSC_OUT
+Mcu.Pin5=PA2
+Mcu.Pin6=PA3
+Mcu.Pin7=PB13
+Mcu.Pin8=PB14
+Mcu.Pin9=PB15
+Mcu.PinsNb=17
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F302R8Tx
+MxCube.Version=6.10.0
+MxDb.Version=DB.6.0.100
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_0
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:true\:false\:true\:true\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=TMS
+PA13.Locked=true
+PA13.Mode=Serial_Wire
+PA13.Signal=SYS_JTMS-SWDIO
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=TCK
+PA14.Locked=true
+PA14.Mode=Serial_Wire
+PA14.Signal=SYS_JTCK-SWCLK
+PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
+PA8.Locked=true
+PA8.Signal=S_TIM1_CH1
+PB13.Mode=Full_Duplex_Master
+PB13.Signal=SPI2_SCK
+PB14.Mode=Full_Duplex_Master
+PB14.Signal=SPI2_MISO
+PB15.Mode=Full_Duplex_Master
+PB15.Signal=SPI2_MOSI
+PB3.GPIOParameters=GPIO_Label
+PB3.GPIO_Label=SWO
+PB3.Locked=true
+PB3.Mode=Trace_Asynchronous_SW
+PB3.Signal=SYS_JTDO-TRACESWO
+PB6.GPIOParameters=GPIO_Speed,PinState
+PB6.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PB6.Locked=true
+PB6.PinState=GPIO_PIN_SET
+PB6.Signal=GPIO_Output
+PC13.GPIOParameters=GPIO_Label,GPIO_ModeDefaultEXTI
+PC13.GPIO_Label=B1 [Blue PushButton]
+PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
+PC13.Locked=true
+PC13.Signal=GPXTI13
+PC14\ -\ OSC32_IN.Locked=true
+PC14\ -\ OSC32_IN.Mode=LSE-External-Oscillator
+PC14\ -\ OSC32_IN.Signal=RCC_OSC32_IN
+PC15\ -\ OSC32_OUT.Locked=true
+PC15\ -\ OSC32_OUT.Mode=LSE-External-Oscillator
+PC15\ -\ OSC32_OUT.Signal=RCC_OSC32_OUT
+PF0-OSC_IN.Locked=true
+PF0-OSC_IN.Mode=HSE-External-Clock-Source
+PF0-OSC_IN.Signal=RCC_OSC_IN
+PF1-OSC_OUT.Locked=true
+PF1-OSC_OUT.Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F302R8Tx
+ProjectManager.FirmwarePackage=STM32Cube FW_F3 V1.11.4
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Core/Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=nucleo-stm32f302r8.ioc
+ProjectManager.ProjectName=nucleo-stm32f302r8
+ProjectManager.ProjectStructure=
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=STM32CubeIDE
+ProjectManager.ToolChainLocation=
+ProjectManager.UAScriptAfterPath=
+ProjectManager.UAScriptBeforePath=
+ProjectManager.UnderRoot=true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_SPI2_Init-SPI2-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true
+RCC.ADC12outputFreq_Value=64000000
+RCC.AHBFreq_Value=64000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV2
+RCC.APB1Freq_Value=32000000
+RCC.APB1TimFreq_Value=64000000
+RCC.APB2Freq_Value=64000000
+RCC.APB2TimFreq_Value=64000000
+RCC.CortexFreq_Value=64000000
+RCC.FCLKCortexFreq_Value=64000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=64000000
+RCC.HSEPLLFreq_Value=4000000
+RCC.HSE_VALUE=8000000
+RCC.HSIPLLFreq_Value=4000000
+RCC.HSI_VALUE=8000000
+RCC.I2C1Freq_Value=8000000
+RCC.I2C2Freq_Value=8000000
+RCC.I2C3Freq_Value=8000000
+RCC.I2SClocksFreq_Value=64000000
+RCC.IPParameters=ADC12outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSEPLLFreq_Value,HSE_VALUE,HSIPLLFreq_Value,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2SClocksFreq_Value,LSI_VALUE,MCOFreq_Value,PLLCLKFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLP,PLLQ,RCC_PLLsource_Clock_Source_FROM_HSE,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM2Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOOutput2Freq_Value
+RCC.LSI_VALUE=40000
+RCC.MCOFreq_Value=64000000
+RCC.PLLCLKFreq_Value=64000000
+RCC.PLLM=8
+RCC.PLLMCOFreq_Value=64000000
+RCC.PLLMUL=RCC_PLL_MUL16
+RCC.PLLN=336
+RCC.PLLP=RCC_PLLP_DIV4
+RCC.PLLQ=7
+RCC.RCC_PLLsource_Clock_Source_FROM_HSE=RCC_HSE_PREDIV_DIV2
+RCC.RTCFreq_Value=40000
+RCC.RTCHSEDivFreq_Value=250000
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TIM15Freq_Value=64000000
+RCC.TIM16Freq_Value=64000000
+RCC.TIM17Freq_Value=64000000
+RCC.TIM1Freq_Value=64000000
+RCC.TIM2Freq_Value=64000000
+RCC.USART1Freq_Value=32000000
+RCC.USART2Freq_Value=32000000
+RCC.USART3Freq_Value=32000000
+RCC.USBFreq_Value=64000000
+RCC.VCOOutput2Freq_Value=4000000
+SH.GPXTI13.0=GPIO_EXTI13
+SH.GPXTI13.ConfNb=1
+SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
+SH.S_TIM1_CH1.ConfNb=1
+SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_32
+SPI2.CalculateBaudRate=1000.0 KBits/s
+SPI2.DataSize=SPI_DATASIZE_8BIT
+SPI2.Direction=SPI_DIRECTION_2LINES
+SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,NSSPMode
+SPI2.Mode=SPI_MODE_MASTER
+SPI2.NSSPMode=SPI_NSS_PULSE_DISABLE
+SPI2.VirtualType=VM_MASTER
+TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM1.IPParameters=Channel-PWM Generation1 CH1
+USART2.BaudRate=9600
+USART2.IPParameters=VirtualMode-Asynchronous,BaudRate
+USART2.VirtualMode-Asynchronous=VM_ASYNC
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM1_VS_ClockSourceINT.Mode=Internal
+VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
+board=NUCLEO-F302R8
+boardIOC=true
+isbadioc=false